GDALTRANSFORM(1) GDAL GDALTRANSFORM(1)

gdaltransform - Transforms coordinates.

gdaltransform [--help] [--help-general]
    [-i] [-s_srs <srs_def>] [-t_srs <srs_def>] [-to <NAME>=<VALUE>]...
    [-s_coord_epoch <epoch>] [-t_coord_epoch <epoch>]
    [-ct <proj_string>] [-order <n>] [-tps] [-rpc] [-geoloc]
    [-gcp <pixel> <line> <easting> <northing> [elevation]]...
    [-output_xy] [-E] [-field_sep <sep>] [-ignore_extra_input]
    [<srcfile> [<dstfile>]]


The gdaltransform utility reprojects a list of coordinates into any supported projection,including GCP-based transformations.

Show this help message and exit

--help-general
Gives a brief usage message for the generic GDAL commandline options and exit.

Set source spatial reference. The coordinate systems that can be passed are anything supported by the OGRSpatialReference.SetFromUserInput() call, which includes EPSG PCS and GCSes (i.e. EPSG:4296), PROJ.4 declarations (as above), or the name of a .prj file containing well known text.

New in version 3.8.

Assign a coordinate epoch, linked with the source SRS. Useful when the source SRS is a dynamic CRS. Only taken into account if -s_srs is used.

Before PROJ 9.4, -s_coord_epoch and -t_coord_epoch were mutually exclusive, due to lack of support for transformations between two dynamic CRS.


set target spatial reference. The coordinate systems that can be passed are anything supported by the OGRSpatialReference.SetFromUserInput() call, which includes EPSG PCS and GCSes (i.e. EPSG:4296), PROJ.4 declarations (as above), or the name of a .prj file containing well known text.

New in version 3.8.

Assign a coordinate epoch, linked with the output SRS. Useful when the output SRS is a dynamic CRS. Only taken into account if -t_srs is used.

Before PROJ 9.4, -s_coord_epoch and -t_coord_epoch were mutually exclusive, due to lack of support for transformations between two dynamic CRS.


A PROJ string (single step operation or multiple step string starting with +proj=pipeline), a WKT2 string describing a CoordinateOperation, or a urn:ogc:def:coordinateOperation:EPSG::XXXX URN overriding the default transformation from the source to the target CRS. It must take into account the axis order of the source and target CRS.

New in version 3.0.


set a transformer option suitable to pass to GDALCreateGenImgProjTransformer2().

order of polynomial used for warping (1 to 3). The default is to select a polynomial order based on the number of GCPs.

Force use of thin plate spline transformer based on available GCPs.

Force use of RPCs.

Force use of Geolocation Arrays.

Inverse transformation: from destination to source.

Provide a GCP to be used for transformation (generally three or more are required). Pixel and line need not be integers.

Restrict output to "x y" instead of "x y z"

New in version 3.9.

Set this flag to avoid extra non-numeric content at end of input lines to be appended to the output lines.


New in version 3.9.

Enable Echo mode, where input coordinates are prepended to the output lines.


New in version 3.9.

Defines the field separator, to separate different values. It defaults to the space character.


<srcfile>
Raster dataset with source projection definition or GCPs. If not given, source projection/GCPs are read from the command-line -s_srs or -gcp parameters.

Note that only the SRS and/or GCPs of this input file is taken into account, and not its pixel content.


<dstfile>
Raster dataset with destination projection definition.

Coordinates are read as pairs, triples (for 3D,) or (since GDAL 3.0.0,) quadruplets (for X,Y,Z,time) of numbers per line from standard input, transformed, and written out to standard output in the same way. All transformations offered by gdalwarp are handled, including gcp-based ones.

Starting with GDAL 3.9, additional non-numeric content (typically point name) at the end of an input line will also be appended to the output line, unless the -ignore_extra_input is added.

Note that input and output must always be in decimal form. There is currently no support for DMS input or output.

If an input image file is provided, input is in pixel/line coordinates on that image. If an output file is provided, output is in pixel/line coordinates on that image.

Simple reprojection from one projected coordinate system to another:

gdaltransform -s_srs EPSG:28992 -t_srs EPSG:31370
177502 311865


Produces the following output in meters in the "Belge 1972 / Belgian Lambert 72" projection:

244296.724777415 165937.350217148 0


The following command requests an RPC based transformation using the RPC model associated with the named file. Because the -i (inverse) flag is used, the transformation is from output georeferenced (WGS84) coordinates back to image coordinates.

gdaltransform -i -rpc 06OCT20025052-P2AS-005553965230_01_P001.TIF
125.67206 39.85307 50


Produces this output measured in pixels and lines on the image:

3499.49282422381 2910.83892848414 50


15-term time-dependent Helmert coordinate transformation from ITRF2000 to ITRF93 for a coordinate at epoch 2000.0

gdaltransform -ct "+proj=pipeline +step +proj=unitconvert +xy_in=deg \
+xy_out=rad +step +proj=cart +step +proj=helmert +convention=position_vector \
+x=0.0127 +dx=-0.0029 +rx=-0.00039 +drx=-0.00011 +y=0.0065 +dy=-0.0002 \
+ry=0.00080 +dry=-0.00019 +z=-0.0209 +dz=-0.0006 +rz=-0.00114 +drz=0.00007 \
+s=0.00195 +ds=0.00001 +t_epoch=1988.0 +step +proj=cart +inv +step \
+proj=unitconvert +xy_in=rad +xy_out=deg"
2 49 0 2000


Produces this output measured in longitude degrees, latitude degrees and ellipsoid height in meters:

2.0000005420366 49.0000003766711 -0.0222802283242345


Task: find one address and assign another. We pick Salt Lake City, where road names are their grid values. We first establish some ground control points at road intersections. We'll use --optfile for easy reuse of our GCPs.

echo -output_xy \
-gcp 0   0    -111.89114717 40.76932606 \
-gcp 0   -500 -111.89114803 40.75846686 \
-gcp 500 0    -111.87685039 40.76940631 > optfile.txt


Where is the address "370 S. 300 E."?

echo 300 -370 370 S. 300 E. | gdaltransform --optfile optfile.txt
-111.8825697384 40.761338402 370 S. 300 E.


Nearby, a newly constructed building needs an address assigned. We use -i:

echo -111.88705 40.76502 Building ABC123 | gdaltransform -i --optfile optfile.txt
143.301947786644 -199.32683635161 Building ABC123


(i.e., 143 E. 200 S. Or 144 if across the street.)

Frank Warmerdam <warmerdam@pobox.com>, Jan Hartmann <j.l.h.hartmann@uva.nl>

1998-2025

January 8, 2025